QNAP TS-873-8G Diskless Professional-grade 8-bay NAS

Regular price $ 959.04 Sale

Availability: Available Unavailable

MPN: TS-873-8G-US

Product Vendor: QNAP

Product SKU: TS-873-8G-US

QNAP TS-873 Diskless 8-bay NAS/iSCSI IP-SAN AMD RX-421ND 2.1~3.4 GHz, 8GB DDR4 RAM, 4x 2.5"/3.5" + 2x M.2 2280/2260 SATA 6Gb/s drives, 4x GbE LAN, optional 10GbE PCIe expansion. Inclusive of NASBIT. TS-873-8G CPU Processor: AMD R-Series RX-421ND quad-core 2.1 GHz...

Your Custom Configuration:
  • No Hard Drive
  • No RAID
  • No RAM Upgrade
  • No RAIL
  • No LAN Card
  • No Warranty
  • No SSD Cache

Price (including options)

Regular price $ 959.04 Sale

Product Details

QNAP TS-873 Diskless 8-bay NAS/iSCSI IP-SAN AMD RX-421ND 2.1~3.4 GHz, 8GB DDR4 RAM, 4x 2.5"/3.5" + 2x M.2 2280/2260 SATA 6Gb/s drives, 4x GbE LAN, optional 10GbE PCIe expansion. Inclusive of NASBIT.

TS-873-8G

CPU Processor: AMD R-Series RX-421ND quad-core 2.1 GHz processor, Turbo Core up to 3.4 GHz
Architecture: 64-bit
Encryption Engine: AES-NI
System Memory 8 GB DDR4 (2 x 4 GB)
Maximum Memory 64 GB (4 x 16 GB)
Memory Slot 4 x SODIMM DDR4
(For dual- or quad-DIMM configurations, you must use a pair of identical DDR4 modules.)
Flash Memory 512MB DOM
Drive Bay 8 x SATA 6 Gbps
Drive Compatibility • 3.5-inch SATA hard disk drives
• 2.5-inch SATA hard disk drives
• 2.5-inch SATA solid state drives
M.2 SSD Slot 2 x M.2 2260/2280 SATA 6Gb/s SSDs (Sold separately)

Note:
1. The M.2 SSD is not included as standard.
2. M.2 SSD operations can easily generate excessive heat. It is recommended to install a heatsink (from QNAP or a third-party provider) on the M.2 SSD.
SSD Cache Acceleration Support • Drive bays 1 to 8
• M.2 slots 1 to 2
• Optional: M.2 SSD using QNAP QM2 PCIe expansion card
Hot-swappable
The following are not hot-swappable: M.2 SSDs, SSD cache drives, SSDs using PCIe expansion slots.
Gigabit Ethernet Port 4 x RJ45
PCIe Slot 2 x PCIe 3.0 x4
Note: Support full-height 10GbE LAN card, USB 3.1 Gen2 (10Gb/s) expansion card, QM2 card, PCIe wireless network card or a bus-powered graphics card.
USB Port 4 x USB 3.0 (Front: 1; Back: 3)
Audio • 2 x 3.5 mm dynamic microphone jacks
• 1 x 3.5 mm line-out jack
• 1 x speakers

Note: You cannot use the speakers and the line-out jack simultaneously.
USB One Touch Copy Front: USB 3.0
IR sensor Optional QNAP RM-IR004 remote control (MCE compatible)
Form Factor Tower
Dimensions (H x W x D) 188.2 x 329.3 x 279.6 mm
7.41 x 12.96 x 11.01 inch
Power Consumption (W) HDD standby: 36.43 W
In operation: 70.26 W
(with 8 x 2TB HDDs installed)
Sound Level Sound pressure (LpAm): 23.4 dB(A)
Net Weight 6.56 kg (14.46 lbs)
Power Supply Unit 250W, 100-240V AC, 50/60Hz
Fan System: 2 x 120 mm
CPU: 1 x 60 mm
Operating Temperature & Relative Humidity 0 ~ 40˚C ( 32˚F ~ 104˚F ), 5 ~ 95% RH non-condensing, wet bulb: 27˚C (80.6˚F)
Security Slot Kensington security slot

Product Reviews

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

What We Do

The Case for buying an Integrated NAS System from SimplyNAS

Buying a NAS doesn't have to be complicated or stressful. This may only occur at times when looking to buy a diskless NAS as the risk element of receiving a faulty NAS or drives are accentuated. Nothing wrong in buying a diskless NAS and adding your own drives, the savings made may offset the inconvenience of receiving faulty NAS/Drives and having to go deal with returns, or does it? The argument against buying a diskless and self-populating with drives is quite compelling.

Disk Drives:

  • We ensure all drives are compatible with the relevant manufacturer, model provide conformity with the relevant compatibility guidelines.
  • All our disk drives are sourced from manufacturer recommended distributors – we don't buy aftermarket drives or purchase on open grey markets.
  • All our disk drives are sourced from manufacturer recommended distributors – we don't buy aftermarket drives or purchase on open grey markets.
  • Our comprehensive batch rotation ensures customer avoid batch issues and thus promote reliability and longevity.
  • Our methodology for configuration, setting RAID and in-depth burn testing process for disk drives and NAS servers is unsurpassable and the small premium paid for this service is worth its weight in gold.

Why buy your NAS from SimplyNAS - The NAS Experts

NAS Servers:

  • We are authorized partners for all the NAS servers we stock.
  • We only sell and support NAS solutions, as a specialist our knowledge is unsurpassable.
  • Our expertise within the technical arena for NAS servers, provides the glue for preventing our customers from making an incorrect buying decision, as we share our knowledge.
  • Our extensive and professional burn-testing service ensure the optimization and deployment of both NAS and Disk Drives is done to provide peace of mind and total integration.
  • Ready to use out of the box, no if's or buts.

SimplyNAS - The NAS Experts

Thinking of buying a NAS?

QNAP, Synology, Thecus and Drobo – Over fourteen Comprehensive years relationship culminating in our expertise of understanding all the NAS products, and skillfully combining performance, reliability and features to ensure our NAS experts are always at hand to help our customers optimize their storage needs.

At SimplyNAS we balance performance, reliability and compatibility to ensure customers get optimized NAS based disk solutions that perfectly match their Storage needs. All our pre-configured NAS systems are evenly balanced in the areas that really matter.
Call our NAS experts today at 407-960-4690

What is NASBIT?

What is NASBIT?

NASBIT© is a Licensed trademark of SimplyNAS. The acronym stands for Network Attached Storage Burn in Testing. This term is used to describe the process of testing new Network Attached Storage (NAS) hardware and firmware for faults before putting it to use in a live environment. This is done by running 'Stress testing' software for a stipulated period of time often 24 to 48 hours, but longer if needed.

When we receive an order for a NAS system pre-installed with disk drives it's prepared and configured with RAID followed by burn testing to ensure the entire system undergoes a thorough examination thus ensuring the server passes all tests to the highest standards set by us. Should the system hardware or any associated components fail at any point of the testing cycle the system is pulled and returned back as faulty our relevant vendor partner, the process seems simple but setting it up is far from easy.

Hard Disk Drives

All Hard disk drives are pre-tested prior to integration; the smallest of faults be it tolerable within industry standards are classified by us as faults, the hard drive is rejected and eliminated from the process and again returned back to source as a D.O.A. (dead on arrival). We continue to select drives from different batches, so as to eliminate any bad batches that may have been produced during manufacturing.

One integrated the drives are put through a vigorous routine that includes stress testing, including temperature tests and a host of read, writes to ensure the drive platters are stressed to the nth degree.

Memory

First, when the new server is turned on, we boot off of the network, and proceed to run the memory test that takes its sweet time, almost 10-12 hours dependent on manufacturer and model.

RAID

The appropriate RAID level is set and the system awaits completion of RAID synchronization. Once completed the NAS server undergoes numerous re-boots and a deletion of original RAID and a final re-build of RAID level again.

Why is NAS Burn in Testing (NASBIT©) necessary?

If within the designated time span the NAS servers are still running and with zero faults, it is considered suitable for rolling out to our customers. If there is a failure of any kind the systems is replaced with a new one, including hard drives and the process starts again, until the NAS servers passes with ZERO faults.

You would normally expect that this level of testing would be completed by the hardware manufacturers and so these tests shouldn't show up any faults. In our experience of testing hundreds of machines we do find faults, and we do send systems back.

The reason it is so important to perform this level of testing on NAS servers is that the uptime demands are so high. The slightest faults will cause outages and downtime. Once a NAS server is deployed, never again will you have the opportunity to take it offline and perform such detailed testing. Even if it were to crash, there is always a demand that it be put back online as quickly as possible, not left offline whilst thorough diagnostics are completed.

Always remember this is hardware and failures can and will occur even after burn testing has been carried, that is a fact of life we cannot avoid, but we do try and eliminate some of the hassle factor with testing. Thank you for buying from us, we truly appreciate your custom.


NOT AVAILABLE ON DISKLESS UNITS - ONLY FOR SYSTEMS PRECONFIGURED WITH HARD DISK DRIVES
Copyright 2018 by SimplyNAS all rights reserved. Federal copyright law prohibits unauthorized reproduction by any means and imposes fines up to $25,000 for violation.

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Request Quote

QNAP TS-873-8G Diskless Professional-grade 8-bay NAS

Your Custom Configuration:
  • No Hard Drive
  • No RAID
  • No RAM Upgrade
  • No RAIL
  • No Network Card
  • No Warranty
  • No SSD Cache
Loading...

Your cart